Share
The Copper Connection Podcast
Private Water Supplies Explained | Level 3 Plumbing Revision
Season 2, Ep. 97
•
Where does the water come from when a property isn't connected to the mains? 💧
In this episode of The Copper Connection Podcast, we're exploring private water supplies for single-occupancy dwellings — an important topic for Level 3 plumbing students, apprentices and anyone looking to strengthen their understanding of domestic water systems.
Join Chris Bailey as we head out to a rural property and follow the journey of its water supply, from the original source right through to the home.
We'll explore how boreholes and wells access groundwater, what an aquifer is, and why the geology beneath the ground can influence water quality. You'll also learn how submersible pumps differ from surface-mounted pumping systems, why pressure vessels may be used, and how settlement tanks help manage particulate matter in surface-water systems.
But finding water is only part of the job. We'll also look at the risks associated with rivers, streams and springs, the importance of protecting water sources from contamination, and the role of inspection, testing and risk assessment in private water supplies.
We'll explain the distinction between the Water Supply (Water Fittings) Regulations 1999 and the Private Water Supplies Regulations 2009, helping you understand why the source of a property's water matters.
Whether you're studying the Level 3 Advanced Technical Diploma in Plumbing, preparing for assessments, completing an apprenticeship or building your wider trade knowledge, this episode breaks down the key principles using practical examples and straightforward explanations.
Because finding water isn't the same as having a safe water supply.
What you'll learn- What a private water supply is and where it can come from
- The differences between boreholes and wells
- What an aquifer is and how geology can affect water quality
- How submersible and surface-mounted pumps work
- The role of pressure vessels in pumping systems
- The risks associated with river, stream and spring water
- How settlement tanks and strainers help manage solids
- Why private water supplies need risk assessment, inspection and testing
- The key distinction between mains water fittings regulations and private water supply regulations
🎧 Listen, learn and build your plumbing knowledge with The Copper Connection Podcast — practical explanations for plumbing students, apprentices and the next generation of skilled tradespeople.
🌐 Website: https://www.thecopperconnectionpodcast.co.uk
🎙️ Listen on Acast: https://shows.acast.com/the-copper-connection-podcast
🛍️ Visit the store: https://thecopperconnectionpodcast.store
If this episode helps with your revision, share it with a fellow plumbing student or apprentice. Follow the podcast so you don't miss the next episode, and leave a review to help more learners discover The Copper Connection.
More episodes
View all episodes
96. T-Level DSP Revision: BIM, CDE, EIR & Plan of Work
24:28||Season 2, Ep. 96How well do you understand BIM, the Plan of Work, the Common Data Environment (CDE) and Employer's Information Requirements (EIR)? These are key topics in T-Level DSP Core Paper 2, Content Area 9.9, and understanding how they connect is essential for your construction theory revision.In this episode of The Copper Connection Podcast, Chris Bailey breaks down these important building information management concepts using practical construction examples. Discover why BIM is much more than 3D modelling, how a Common Data Environment keeps project information accurate and accessible, and how Employer's Information Requirements define the information a client needs and when it must be delivered.We also work through the eight Plan of Work stages in the order specified for your revision, explore the seven characteristics of BIM, and explain how the BIM Execution Plan turns the client's information requirements into a delivery approach. Finally, we examine how effective information exchange can reduce rework, improve decision-making and support a smoother project handover.What you'll learn:Understand the eight Plan of Work stages and their sequence.Explain BIM and its seven specified characteristics.Identify the purpose and key characteristics of a Common Data Environment (CDE).Explain Employer's Information Requirements (EIR) and the five questions they address.Distinguish between the EIR and the BIM Execution Plan.Describe how information exchange affects project delivery, coordination and handover.Apply these concepts to practical building services engineering scenarios.Your revision challenge: Write the eight Plan of Work stages from memory, then define BIM, CDE and EIR in one sentence each. Finally, practise answering the five questions that an EIR must address.T-Level DSP revision, BIM, Common Data Environment (CDE), Employer's Information Requirements (EIR), Plan of Work stages, T-Level Building Services Engineering, Core Paper 2, Content Area 9.9, BSE revision, construction theory.
95. Level 3 Diploma Cold Water System Planning & Design | Revision Guide
25:07||Season 2, Ep. 95Cold water systems in multistorey buildings can become complicated quickly — especially when mains pressure alone cannot provide the required flow and pressure at higher levels. In this Level 3 Diploma episode, Chris Bailey breaks down the planning and design of cold water systems and explains why boosting equipment is required in high-rise buildings and buildings constructed on high ground. The episode works through the main boosting arrangements, including direct boosted systems, header pipe systems, indirect boosting through a low-level break system and automatic pneumatic systems. It then moves into the components and controls you'll encounter in larger installations, including pumps, flow switches, solenoid valves, transducers, temperature sensors, control boxes and accumulators. Particular attention is given to accumulator operation and the calculations behind them. You'll work through pre-charge pressure, stored water volume, shower duration and refill time, alongside the principles behind Boyle's law and how compressed air helps maintain system pressure. What you'll learnUnderstand why boosting equipment is required in multistorey and high-level buildings.Explain the purpose and operation of the main cold water boosting systems.Identify the components found within booster pump packages.Explain how flow switches, solenoid valves and transducers control system operation.Understand how break systems are designed to protect the incoming mains supply and prevent pump dry running.Calculate accumulator storage capacity, shower duration and refill times.Apply Boyle's law to the operation of accumulator vessels.Identify the design factors that need to be considered when selecting an accumulator.Before moving on, have a go at the accumulator calculations yourself. Change the supply pressure, flow rate or stored volume and see whether you can work through the complete calculation without looking back at the episode.www.thecopperconnectionpodcast.co.uk
94. DSP T Level BSE Core Paper 1 — Building Regulations, Approved Documents & Standards Explained
33:03||Season 2, Ep. 94"Which documents are you working to?" One question from a Building Control Surveyor at the bottom of a loft ladder in Blackpool, and three trades go quiet. By the end of this episode, you'll be the one with the answer.This episode covers the Building Regulations, Approved Documents and standards that govern design for T Level Building Services Engineering Core Paper 1, Content Area 4 (4.3.1, 4.4.1–4.4.3, 4.5.1–4.5.2), with crossover into Core Paper 2 (8.3.4, 10.4.1, 14.6). Chris Bailey sets out the authority hierarchy — regulations as law, Approved Documents as guidance, British and ISO Standards as technical benchmarks, manufacturers' instructions as product-specific requirements — with myth-versus-fact moments on the mix-ups that cost marks.Then it's a walk through all fourteen Approved Documents, A to S plus Approved Document 7, in the order you'd meet them building a house. After that: the British Standard and ISO areas in the spec, Common Minimum Standards for public sector work, the three types of manufacturers' manual, commissioning vs O&M, and why manuals belong inside a BIM environment. We finish back in the loft, testing nine Approved Documents against one domestic job.Homework: write the fourteen letters down a page, fill in each subject from memory, score yourself out of fourteen — and repeat it every week.building regulations approved documents, t level bse core paper 1, british standards and iso standards, manufacturers manuals and bim, approved documents a to s revision.thecopperconnectionpodcast.co.uk
93. 9289 Apprenticeship Unit 314 — Solar Thermal Hot Water: How It Actually Works
19:09||Season 2, Ep. 93Half seven on a February morning, you're stood in somebody's airing cupboard and the customer says the line everyone says: "it's got them panels on the roof, but the water's still cold." Is that system broken, or is it working exactly as designed and nobody ever explained it? This episode covers the operating principles of solar thermal hot water for Unit 314, Environmental technology systems, Phase 3 of the 9289 Plumbing and Domestic Heating apprenticeship (ST0303), Learning Outcome 2 / AC2.1.Chris Bailey also shares some big news — The Copper Connection Podcast has been shortlisted as a finalist at the 2026 Independent Podcast Awards in the Best Children and Young Adults category.Then it's straight into the kit: the five key components as a journey rather than a list — roof, brain, muscle, store, backup. Flat plate against evacuated tube and the exam-ready comparison. The differential temperature controller and why a pump sat still is not a pump that's failed. Glycol, freeze protection and why the manufacturer's percentage dilution decides whether the system performs. And the twin-coil cylinder detail that gets marks: lower coil solar, higher coil auxiliary.You will learn to:Name the five key components of a solar thermal hot water system and place them in the loopCompare flat plate and evacuated tube collectors on cost and efficiencyExplain how a vacuum improves collector efficiency and how the heat exchanger phial and header tube workDescribe how the DTC uses collector and cylinder sensors to activate and deactivate the pumpExplain why the heat transfer fluid contains glycol and why dilution percentage affects performanceIdentify which cylinder coil serves the solar system and which serves the auxiliary heat sourceExplain why solar thermal in the UK is a pre-heat system needing an auxiliary heat sourceLinks referenced: Solar water heating (Worcester Bosch) https://www.youtube.com/watch?v=bhbOVqixsAw • Charging a closed loop solar water heating system https://www.youtube.com/watch?v=_geY-eKvBI8 • Fernox Solar S1 20 Litre dilution instructions https://fernox.com/product/solar-s1-20-litre/Get label the components and water flow on the system diagram, and research the regulations affecting whether a solar thermal system can be installed at all — that's where we pick up next time.solar thermal hot water, unit 314 environmental technology systems, differential temperature controller, evacuated tube vs flat plate collectors, 9289 apprenticeship ST0303 phase 3thecopperconnectionpodcast.co.uk
92. Level 3 Diploma Unit 314 — Renewable & Non-Renewable Energy Sources Explained
22:13||Season 2, Ep. 92Four identical houses on one street: one on mains gas, one on LPG, one on oil and coal, one with panels on the roof and a heat pump out the back. Between them you have nearly every energy source in Unit 314 — and your job is knowing which is which, and why it matters.This episode covers sources of renewable and non-renewable energy for Unit 314 of the 9289 Level 3 Diploma, Phase 3, Learning Outcome 1 (AC1.1–1.3). Chris Bailey sets out the two reasons we move toward renewables — emissions and depletion — then works the four non-renewable headings (oils, gases, solid fuels, and electricity generated from non-renewable sources), before tackling the distinction that catches most learners out: low-carbon producers versus zero-carbon producers. He then walks every technology one by one — solar thermal, solar PV, wind, tidal and river hydro, geothermal heat pumps, biomass and green hydrogen — and finishes by deriving all ten worksheet answers from first principles, naming the two traps that lose marks.You will learn to:Define non-renewable energy as finite, and renewable energy as sources that do not run outList the four headings of non-renewable energy, including electricity from non-renewable generationExplain why electricity is a carrier, not a sourceDistinguish low-carbon producers from zero-carbon producersSeparate solar thermal (heat for hot water) from solar photovoltaic (DC converted to AC)Explain how wind, tidal barrages, tidal stream, river and dam hydro generate electricityDefine a heat pump as moving heat from a low- to high-temperature reservoir via the refrigeration cycleState the condition that makes hydrogen renewable — green hydrogen via electrolysisSort ten appliances into low-carbon and high-carbon producersAlso in this episode: The Copper Connection Podcast has been shortlisted as a finalist at the 2026 Independent Podcast Awards in the Best Children and Young Adults category.Homework: keep your eyes open for solar thermal systems locally — hot water, not PV — and bring a picture in, because the next session builds directly on solar thermal.renewable and non-renewable energy, unit 314 environmental technology systems, low-carbon and zero-carbon producers, solar thermal vs solar pv, 9289 level 3 diploma phase 3thecopperconnectionpodcast.co.uk
91. Fault Diagnosis on Sanitary Appliances & Pipework | Unit 311, Learning Outcome 4
24:44||Season 2, Ep. 91A macerator that keeps cycling on its own, a basin that loses its trap seal every time it's used, a WC flush that sends water bubbling up through the bath next door — these are the calls that separate a plumber who guesses from one who diagnoses. In this episode of The Copper Connection Podcast, Chris Bailey covers Learning Outcome 4 of Unit 311 for the Level 3 Diploma in Plumbing and Domestic Heating (City & Guilds 6035 / SmartScreen Unit 311): fault diagnosis and rectification on sanitary appliances and pipework.This episode supports AC 4.1, 4.2 and 4.3:• AC 4.1: Methods of diagnosing sanitary appliance and pipework faults• AC 4.2: Diagnostic checks for a range of common faults• AC 4.3: Repair and rectification procedures for those faultsYou will learn to:• Use the three real diagnostic tools — the customer's own account, manufacturer fault-finding charts, and the governing standards (Approved Document Part H and BS EN 12058)• Apply the seven-step process every time: diagnose, notify, isolate, decommission, rectify, re-commission, handover• Diagnose and clear blockages the right way — trap first, mechanical clearing second, chemicals only as a last resort• Identify and name all seven causes of trap seal loss: leak, evaporation, wavering out, self-siphonage, induced siphonage, compression and momentum• Recognise faults caused by poor installation — drooping pipework, warped stacks with no allowance for expansion, and cross-flow between a WC and an adjacent bath• Diagnose and rectify faults on macerators, waste lifters, sink waste-disposal units, air admittance valves and condensate pipes• Understand why regular maintenance — and a good handover conversation — prevents most of these faults from coming backThis is the direct follow-on from the central heating fault-finding episode, moving from the heating side of the trade to the wet side — same discipline, same seven steps, different appliances.Follow The Copper Connection Podcast for practical, exam-focused support for plumbing, heating and building-services learners.https://thecopperconnectionpodcast.co.uk/
90. Level 3 Diploma Unit 311 — Central Heating Fault Diagnosis & Rectification Explained
27:08||Season 2, Ep. 90Radiators warm at the top and freezing at the bottom, a boiler that ticks but never quite delivers, a drip the customer says has always been there. Where do you actually start? This episode covers fault diagnosis and rectification on central heating systems and components for Unit 311 of the Level 3 Diploma in Plumbing and Domestic Heating, Phase 3, Learning Outcome 3.Chris Bailey covers the general inspection every older system needs before a component is touched, the three diagnostic tools — fault-finding flow charts, fault-finding grids and manufacturer instructions — and the seven-stage fault rectification process every job should follow. He then works through twenty common faults by symptom, cause and action, from pumping over and persistent venting through to motorised valve failure and pump failure, before applying it all to six worksheet-style exam scenarios.You will learn to:Carry out a general inspection on an older central heating systemApply fault-finding flow charts and fault-finding grids to narrow down a faultUse manufacturer instructions correctly before working on a boilerApply the seven-stage rectification process: diagnose, notify, isolate, decommission, rectify, re-commission, handoverDiagnose common central heating faults by symptom, cause and actionExplain the effects of magnetite on a central heating systemGrab your Unit 311 Worksheet 3 and work through the six fault-finding scenarios before the next session.central heating fault diagnosis, seven-stage rectification process, unit 311 phase 3, level 3 diploma in plumbing and domestic heating, magnetite and system faults
89. Unit 307 Water Treatment Explained | Level 3 Diploma & 9289 Phase 2 Plumbing Revision Podcast
20:12||Season 2, Ep. 89The Copper Connection Podcast – Season 2, Episode 89, Unit 307 Water Treatment Explained | Level 3 Diploma & 9289 Phase 2 Plumbing Revision PodcastFit the wrong water treatment kit in a hard water area and the customer's boiler is furred up by year five even if every joint you made was perfect. This episode clears up the single biggest source of confusion in Unit 307 (Level 3 Diploma, and 9289 Phase 2 for apprenticeship / ST0303 apprenticeship learners): the difference between water conditioners, water softeners and drinking water filters, and which one belongs where on a domestic cold water system.Chris Bailey walks through the chemistry of temporary hard water and limescale precipitation at 65°C, then breaks down all three magnetic, electrolytic and electronic conditioners, base-exchange softeners with the mandatory unsoftened kitchen tap rule, and every one of the six drinking water filter types your assessor will ask you to name. It's a proper UK plumbing revision session tying water treatment back into cold water systems, WRAS-approved storage cisterns and the Water Supply Regulations 1999 exactly the shared ground between the Level 3 Diploma and 9289 domestic plumbing and heating.What you'll learn:Understand why calcium carbonate precipitates as limescale at 65°C and what it does to appliancesExplain how magnetic, electrolytic and electronic conditioners change calcium behaviour without removing itIdentify where each conditioner type is fitted (appliance-specific vs whole-house)Explain base exchange in a water softener and the drop from 350 mg/l down to under 10 mg/lApply the unsoftened kitchen draw-off rule for wholesome drinking waterIdentify all six drinking water filter forms: activated carbon, ion exchange, sediment, reverse osmosis, distillation, disinfectionMatch a customer complaint to the correct filter on siteTie water treatment back into cold water storage cistern requirements and the Water Supply Regulations 1999Grab your Unit 307 handout on domestic water treatment equipment and test yourself on naming the six filter types and their uses before your next assessment.9289 phase 2plumbing revision podcastcold water systemsmastering plumbing theorylevel 3 construction qualificationsuk construction theorywater treatmenteducational resources for plumbingcold water systems in plumbing