Share

The Copper Connection Podcast
Level 3 Diploma Unit 314 — Renewable & Non-Renewable Energy Sources Explained
Four identical houses on one street: one on mains gas, one on LPG, one on oil and coal, one with panels on the roof and a heat pump out the back. Between them you have nearly every energy source in Unit 314 — and your job is knowing which is which, and why it matters.
This episode covers sources of renewable and non-renewable energy for Unit 314 of the 9289 Level 3 Diploma, Phase 3, Learning Outcome 1 (AC1.1–1.3). Chris Bailey sets out the two reasons we move toward renewables — emissions and depletion — then works the four non-renewable headings (oils, gases, solid fuels, and electricity generated from non-renewable sources), before tackling the distinction that catches most learners out: low-carbon producers versus zero-carbon producers. He then walks every technology one by one — solar thermal, solar PV, wind, tidal and river hydro, geothermal heat pumps, biomass and green hydrogen — and finishes by deriving all ten worksheet answers from first principles, naming the two traps that lose marks.
You will learn to:
Define non-renewable energy as finite, and renewable energy as sources that do not run out
List the four headings of non-renewable energy, including electricity from non-renewable generation
Explain why electricity is a carrier, not a source
Distinguish low-carbon producers from zero-carbon producers
Separate solar thermal (heat for hot water) from solar photovoltaic (DC converted to AC)
Explain how wind, tidal barrages, tidal stream, river and dam hydro generate electricity
Define a heat pump as moving heat from a low- to high-temperature reservoir via the refrigeration cycle
State the condition that makes hydrogen renewable — green hydrogen via electrolysis
Sort ten appliances into low-carbon and high-carbon producers
Also in this episode: The Copper Connection Podcast has been shortlisted as a finalist at the 2026 Independent Podcast Awards in the Best Children and Young Adults category.
Homework: keep your eyes open for solar thermal systems locally — hot water, not PV — and bring a picture in, because the next session builds directly on solar thermal.
renewable and non-renewable energy, unit 314 environmental technology systems, low-carbon and zero-carbon producers, solar thermal vs solar pv, 9289 level 3 diploma phase 3
thecopperconnectionpodcast.co.uk
More episodes
View all episodes

103. Construction Project Management and Sustainability | T Level DSP & BSE Paper 2
10:37||Season 2, Ep. 103Preparing for your Pearson T Level Design, Surveying and Planning for Construction and WJEC Building Services Engineering Paper 2 exam?In Episode 2 of The Copper Connection Podcast's November Resit Revision Series, we explore construction project management and sustainability, helping you understand how construction projects are planned, managed and delivered.This focused revision episode looks at the importance of project planning, managing time, cost and quality, identifying project risks and understanding sustainability within the construction industry.We also consider how to apply your knowledge to construction scenarios and approach exam-style questions with confidence.In this episode:Construction project management principlesProject planning and organisationTime, cost and qualityConstruction project risksSustainability in the built environmentApplying knowledge to exam-style scenariosWhether you're preparing for a November resit or strengthening your understanding of the Pearson T Level DSP qualification, this episode is designed to support your revision.More from The Copper Connection Podcast:Website: https://www.thecopperconnectionpodcast.co.ukListen on Acast: https://shows.acast.com/the-copper-connection-podcastExplore our resources: https://thecopperconnectionpodcast.storeSubscribe and follow The Copper Connection Podcast for more T Level revision, plumbing education and Building Services Engineering content.
102. Types of Hot Water Supply Systems Explained | Level 3 Plumbing Unit 332 Revision
27:39||Season 2, Ep. 102How many different types of domestic hot water systems can you identify, and more importantly, do you understand how they actually work?In this episode of The Copper Connection Podcast, Chris Bailey takes you through the different types of domestic hot water supply systems used in UK properties, explaining how they operate, how their pipework is arranged and why selecting the right system matters.This episode is particularly useful for students studying the City & Guilds Level 3 Advanced Technical Diploma in Plumbing (8202-35), Unit 332: Hot Water System Planning and Design, as well as plumbing apprentices developing their technical knowledge for 9289 Phase 2.Rather than simply memorising system names, this revision episode explores how each system operates and the practical considerations that influence system selection.WHAT WE COVER IN THIS EPISODE🔧 Centralised and Localised Hot Water SystemsThe difference between centralised and localised hot water provision.Where different arrangements may be suitable.Oversink and undersink water heaters.🔥 Open-Vented Direct and Indirect SystemsDirect hot water storage cylinders.Indirect cylinders and internal heat exchanger coils.Double-feed indirect systems.Single-feed, self-venting indirect systems, also known as Primatic cylinders.💧 Unvented Hot Water Storage SystemsHow unvented systems operate.Mains-fed hot water storage.Expansion vessels and expansion bubbles.The importance of mechanical safety devices.♨️ Instantaneous Hot Water SystemsMulti-point instantaneous water heaters.Combination boilers and their dual-function operation.How a diverter valve operates.Plate heat exchangers and hot water priority.The relationship between incoming mains flow, pressure and appliance performance.⚙️ Thermal Stores and Combination UnitsHow thermal stores operate.The difference between thermal stores and conventional indirect cylinders.Open-vented combination units and their applications.☀️ Solar Thermal Hot Water SystemsEvacuated tube collectors.Heat-transfer fluid circuits.Heat exchanger coils.How solar thermal can contribute to domestic hot water production.🔄 Secondary Circulation SystemsThe purpose of a secondary return pipe.Circulating pumps and controls.Balancing and managing heat losses.The importance of understanding the pipework layout.🏠 Planning and Selecting the Right Hot Water SystemMatching systems to property requirements.Understanding household hot water demand.Considering incoming mains pressure and flow rate.Comparing stored and instantaneous hot water.Making informed decisions during a property survey.WHO SHOULD LISTEN?This episode is ideal for:City & Guilds Level 3 Advanced Technical Diploma in Plumbing students – 8202-35.Level 3 Unit 332 Hot Water System Planning and Design learners.Plumbing apprentices developing their technical knowledge, including 9289 Phase 2.Level 2 plumbing learners looking to develop their understanding of domestic hot water systems.Qualified plumbers wanting to refresh their knowledge.Anyone interested in how domestic hot water systems work.WHY THIS TOPIC MATTERSUnderstanding hot water systems is about more than identifying a cylinder or boiler.If this episode helps with your studies or professional development, follow The Copper Connection Podcast, share it with another learner and leave us a review.Find more revision resources and podcast information:🌐 Website: https://www.thecopperconnectionpodcast.co.uk🎧 Listen to more episodes: https://shows.acast.com/the-copper-connection-podcast🛍️ Store: https://thecopperconnectionpodcast.store
101. T Level DSP & BSE Paper 1 Revision: Construction Science and Calculations Explained
08:27||Season 2, Ep. 101Are you preparing for your Pearson T Level Design, Surveying and Planning for Construction (DSP) & Building Services Engineering (BSE)Paper 1 examination or resit?In this focused revision episode of The Copper Connection Podcast, Chris Bailey breaks down construction science calculations and explains how to approach technical exam questions with greater confidence.Knowing the science is one thing. Knowing how to apply it in an examination is another.In this episode, we work through a straightforward method for tackling calculation questions, including identifying the correct quantity, selecting the appropriate formula, substituting values and checking your final answer.We also explore why units matter, how to convert measurements correctly and how to develop stronger written explanations when answering science questions.IN THIS EPISODE:🔧 Understanding what a construction calculation question is asking.🔧 Selecting the correct formula before starting.🔧 Calculating pressure using force and area.🔧 Understanding the difference between metres, square metres and cubic metres.🔧 Converting millimetres into metres.🔧 Understanding SI units and why they matter.🔧 Developing stronger scientific explanations.🔧 Three revision questions to test your knowledge.WHO SHOULD LISTEN?This episode is designed for students studying the Pearson T Level Technical Qualification in Design, Surveying and Planning for Construction, particularly those revising the Science, Measurement and Construction Mathematical Techniques content within Core Paper 1.Whether you're preparing for a November resit, strengthening your understanding or revisiting important construction science principles, this lesson provides a useful starting point.YOUR FIVE-STEP CALCULATION METHODRead the question carefully.Identify what you need to calculate.Select the correct formula.Show your working and check your units.Check whether your answer makes sense.MORE FROM THE COPPER CONNECTION🌐 Website: https://www.thecopperconnectionpodcast.co.uk🎥 YouTube: TheCopperConnectionPodcast🎧 Follow The Copper Connection Podcast on your favourite podcast platform.🛍️ Store: https://thecopperconnectionpodcast.storeThe Copper Connection Podcast is hosted by Chris Bailey, a plumbing and Building Services Engineering tutor, creating educational content to help students, apprentices and trade professionals develop their technical knowledge.Keep learning. Keep grafting. Keep connecting.
100. PESTLE Analysis Explained for Construction | T Level Core Paper 2 Revision
23:14||Season 2, Ep. 100What is PESTLE analysis, and how does it affect the UK construction industry?In this episode of The Copper Connection Podcast, we're breaking down PESTLE analysis and showing you how to apply it to real construction industry situations — helping you prepare for your T Level Construction Core Paper 2 examination.PESTLE is more than six words to memorise. It is an analytical tool used to understand the external forces influencing the construction industry, construction businesses and future projects.In this 23-minute revision episode, plumbing and construction tutor Chris Bailey explains all six PESTLE factors:Political: Government policy, planning decisions, housing targets and public sector spending.Economic: Interest rates, material price inflation, labour availability and access to finance.Social: Demographics, household formation, population changes and changing working patterns.Technological: Modern Methods of Construction (MMC), Building Information Modelling (BIM), digital surveying and automation.Legal: Contract law, Building Regulations, building control, the Health and Safety at Work etc. Act and civil law.Environmental: Climate change, flood risk, biodiversity, carbon targets and environmental performance.But knowing what each letter stands for is only the beginning.We'll also work through a realistic construction industry scenario involving a regional contractor considering investing in an off-site manufacturing facility. You'll see how to identify external influences, explain their effects and reach a reasoned conclusion using PESTLE.What you'll learn in this episodeBy the end of this episode, you should be able to:Explain what Political, Economic, Social, Technological, Legal and Environmental factors mean.Identify current examples of external influences affecting construction.Understand the difference between external macro factors and internal business problems.Apply PESTLE analysis to a construction business decision.Develop stronger answers to extended examination questions.Use the four-step approach: Identify, Classify, Assess Significance and Conclude.T Level Construction Core Paper 2 — Exam RevisionPESTLE is particularly useful when answering questions requiring you to assess or discuss the external factors affecting a construction organisation or project.Chris also explains how to develop your answers beyond simply listing factors, helping you demonstrate application, analysis and justified conclusions.Your revision challengeCreate a PESTLE grid and identify TWO current construction industry examples under each heading. For every example, write one sentence explaining how it could affect a construction business.Can you complete all six headings in two minutes?Episode informationPodcast: The Copper Connection PodcastEpisode: 37Series: Series 2 — Core Paper 2Topic: PESTLE Analysis and the Construction IndustryDuration: 23 minutesSpecification mapping: Content Area 9 — 9.10 and 9.10.1Host: Chris BaileyListen, learn and connectIf you're studying a T Level in Building Services Engineering, Construction, or another technical construction qualification, follow The Copper Connection Podcast for practical revision, technical explanations, exam preparation and real-world industry knowledge.Website: https://www.thecopperconnectionpodcast.co.ukFollow the podcast, share this episode with another learner and keep building your construction knowledge.Keep learning, keep grafting, and keep connecting.
99. Loading Units Explained, Design Flow & Pipe Sizing | Unit 331, 9289 & Level 3 Diploma
22:15||Season 2, Ep. 99Why isn't counting appliances enough to size cold water pipework? Chris Bailey explores Unit 331 — cold water system planning and design — for learners on the 9289 domestic plumbing and heating pathway (ST0303 apprenticeship) and the Level 3 Diploma.This UK plumbing revision explains how loading units estimate demand on cold water systems. Domestic and three-storey examples help plumbing apprentices connect construction theory with design decisions. The episode puts BS EN 806, BS 8558 and the superseded BS 6700 into context. It supports plumbing exam preparation while showing why available pressure, pipe length, fittings and velocity still need checking.You will learn to:Explain why loading units are not flow rates.Identify which appliances and connections each pipe section serves.Calculate domestic and three-storey loading-unit totals.Convert totals to estimated design flow using the appropriate method.Identify the pressure, velocity and resistance checks still required.Avoid five common calculation and design mistakes.Recalculate demand for the incoming supply and a bathroom branch, then compare the two totals.loading units, design flow rate, pipe sizing, Unit 331, 9289 domestic plumbing and heating, Level 3 Diploma, ST0303 apprenticeshiphttps://thecopperconnectionpodcast.co.uk/
98. Open a Tap — Pressure, Force & Flow Explained | Level 2 & Level 3 Diploma
19:00||Season 2, Ep. 98Why does pressure change when you open a tap? This Phase 2 episode helps Level 2 and Level 3 Diploma learners connect force, pressure and flow in plumbing systems.Chris Bailey links mass, gravity and area to pressure in familiar cold water systems. Worked examples help plumbing apprentices connect construction theory with pipework, outlets and gauges. Use the session for UK plumbing revision, with pressure conversions, head and flow calculations explained step by step. The focus is practical plumbing exam preparation, not memorising formulas without understanding them.You will learn to:Explain force, gravity and pressure using plumbing examples.Apply pressure = force ÷ area.Compare static and velocity pressure, and gauge and absolute pressure.Convert between bar, kPa and Pa, and estimate pressure from metres head.Calculate flow rate using cross-sectional area × velocity.Explain how pipe size, length, material, valves and bends affect flow.Calculate equivalent pipe length using the values supplied in the example.Try the equivalent-length example with pulled bends instead of elbows, then explain why the result changes.force and pressure, flow rate, pressure head, phase 2, level 2 diploma, level 3 diplomahttps://thecopperconnectionpodcast.co.uk/
97. Private Water Supplies Explained | Level 3 Plumbing Revision
25:06||Season 2, Ep. 97Where does the water come from when a property isn't connected to the mains? 💧In this episode of The Copper Connection Podcast, we're exploring private water supplies for single-occupancy dwellings — an important topic for Level 3 plumbing students, apprentices and anyone looking to strengthen their understanding of domestic water systems.Join Chris Bailey as we head out to a rural property and follow the journey of its water supply, from the original source right through to the home.We'll explore how boreholes and wells access groundwater, what an aquifer is, and why the geology beneath the ground can influence water quality. You'll also learn how submersible pumps differ from surface-mounted pumping systems, why pressure vessels may be used, and how settlement tanks help manage particulate matter in surface-water systems.But finding water is only part of the job. We'll also look at the risks associated with rivers, streams and springs, the importance of protecting water sources from contamination, and the role of inspection, testing and risk assessment in private water supplies.We'll explain the distinction between the Water Supply (Water Fittings) Regulations 1999 and the Private Water Supplies Regulations 2009, helping you understand why the source of a property's water matters.Whether you're studying the Level 3 Advanced Technical Diploma in Plumbing, preparing for assessments, completing an apprenticeship or building your wider trade knowledge, this episode breaks down the key principles using practical examples and straightforward explanations.Because finding water isn't the same as having a safe water supply.What you'll learnWhat a private water supply is and where it can come fromThe differences between boreholes and wellsWhat an aquifer is and how geology can affect water qualityHow submersible and surface-mounted pumps workThe role of pressure vessels in pumping systemsThe risks associated with river, stream and spring waterHow settlement tanks and strainers help manage solidsWhy private water supplies need risk assessment, inspection and testingThe key distinction between mains water fittings regulations and private water supply regulations🎧 Listen, learn and build your plumbing knowledge with The Copper Connection Podcast — practical explanations for plumbing students, apprentices and the next generation of skilled tradespeople.🌐 Website: https://www.thecopperconnectionpodcast.co.uk🎙️ Listen on Acast: https://shows.acast.com/the-copper-connection-podcast🛍️ Visit the store: https://thecopperconnectionpodcast.storeIf this episode helps with your revision, share it with a fellow plumbing student or apprentice. Follow the podcast so you don't miss the next episode, and leave a review to help more learners discover The Copper Connection.
96. T-Level DSP Revision: BIM, CDE, EIR & Plan of Work
24:28||Season 2, Ep. 96How well do you understand BIM, the Plan of Work, the Common Data Environment (CDE) and Employer's Information Requirements (EIR)? These are key topics in T-Level DSP Core Paper 2, Content Area 9.9, and understanding how they connect is essential for your construction theory revision.In this episode of The Copper Connection Podcast, Chris Bailey breaks down these important building information management concepts using practical construction examples. Discover why BIM is much more than 3D modelling, how a Common Data Environment keeps project information accurate and accessible, and how Employer's Information Requirements define the information a client needs and when it must be delivered.We also work through the eight Plan of Work stages in the order specified for your revision, explore the seven characteristics of BIM, and explain how the BIM Execution Plan turns the client's information requirements into a delivery approach. Finally, we examine how effective information exchange can reduce rework, improve decision-making and support a smoother project handover.What you'll learn:Understand the eight Plan of Work stages and their sequence.Explain BIM and its seven specified characteristics.Identify the purpose and key characteristics of a Common Data Environment (CDE).Explain Employer's Information Requirements (EIR) and the five questions they address.Distinguish between the EIR and the BIM Execution Plan.Describe how information exchange affects project delivery, coordination and handover.Apply these concepts to practical building services engineering scenarios.Your revision challenge: Write the eight Plan of Work stages from memory, then define BIM, CDE and EIR in one sentence each. Finally, practise answering the five questions that an EIR must address.T-Level DSP revision, BIM, Common Data Environment (CDE), Employer's Information Requirements (EIR), Plan of Work stages, T-Level Building Services Engineering, Core Paper 2, Content Area 9.9, BSE revision, construction theory.
95. Level 3 Diploma Cold Water System Planning & Design | Revision Guide
25:07||Season 2, Ep. 95Cold water systems in multistorey buildings can become complicated quickly — especially when mains pressure alone cannot provide the required flow and pressure at higher levels. In this Level 3 Diploma episode, Chris Bailey breaks down the planning and design of cold water systems and explains why boosting equipment is required in high-rise buildings and buildings constructed on high ground. The episode works through the main boosting arrangements, including direct boosted systems, header pipe systems, indirect boosting through a low-level break system and automatic pneumatic systems. It then moves into the components and controls you'll encounter in larger installations, including pumps, flow switches, solenoid valves, transducers, temperature sensors, control boxes and accumulators. Particular attention is given to accumulator operation and the calculations behind them. You'll work through pre-charge pressure, stored water volume, shower duration and refill time, alongside the principles behind Boyle's law and how compressed air helps maintain system pressure. What you'll learnUnderstand why boosting equipment is required in multistorey and high-level buildings.Explain the purpose and operation of the main cold water boosting systems.Identify the components found within booster pump packages.Explain how flow switches, solenoid valves and transducers control system operation.Understand how break systems are designed to protect the incoming mains supply and prevent pump dry running.Calculate accumulator storage capacity, shower duration and refill times.Apply Boyle's law to the operation of accumulator vessels.Identify the design factors that need to be considered when selecting an accumulator.Before moving on, have a go at the accumulator calculations yourself. Change the supply pressure, flow rate or stored volume and see whether you can work through the complete calculation without looking back at the episode.www.thecopperconnectionpodcast.co.uk